Welcome to Luoyang Lirui Bearing Co.,Ltd Sitemap Home Contact

自主栏目Position:Knowledge

132018-08

What is a thin-walled bearing?

Spherical ball bearings are bearings whose inner and outer diameter ratios are less than a specified value. The ratio of the outer diameter of the bearing to the inner diameter o...

132018-08

What is an equal section thin-walled bearing

A thin-walled bearing of equal section means that the bearing is equal in size in both the radial and axial sections and is relatively thin in size, whereas the two dimensions of...

132018-08

How to store the bearings to better extend the bearing life?

Custody Bearings are factory-coated with an appropriate amount of rust preventive oil and packaged in rust-proof paper. As long as the package is not damaged, the quality of th...

132018-08

Equal section thin wall ball bearing

Custody Bearings are factory-coated with an appropriate amount of rust preventive oil and packaged in rust-proof paper. As long as the package is not damaged, the quality of th...

132018-08

Summer bearing maintenance

1. First, put the bearing into the gasoline to clean, wipe off the sludge and dust left on the bearing, and all the rusted bearings are gently wiped with metallographic sandpaper...

132018-08

(LRZ) bearing correct derusting method

First, anti-rust method Surface pretreatment method for anti-rust: 1) Surface cleaning: Cleaning must be based on the nature of the surface of the anti-rust and the current C...

132018-08

Development of industrial robot bearings

China's bearing industry ranks fourth in the world after Japan, the United States and Germany. However, compared with the world's bearing industry, China's bearing industry still...

132018-08

How to correctly understand the limit speed of the bearing

The ultimate speed of the bearing is the maximum speed that can be achieved when the bearing is running. It depends mainly on the relationship between the heat generated by the f...

132018-08

Is the radial clearance of the bearing as small as possible?

Not all bearings require a minimum working clearance and you must select the appropriate clearance depending on the conditions. In GB 4604-93, the radial clearance of the rolling...

132018-08

Thin-walled crossed roller bearing

CRA series thin-walled cross-roller bearings (outer ring split type) are small and lightweight cross-roller bearings that make the outer ring and inner ring wall thickness very t...

TOP

QQ客服

QQ客服

0379-64907522